China wholesaler Factory single phase flange mounted motor, single phase 2hp electric motor with Good quality

Warranty: 3months-1year
Model Number: TJ-single phase motor
Type: Asynchronous Motor
Frequency: 50hz/60hz
Phase: Single-phase
Protect Feature: Drip-proof
AC Voltage: 110/220/380v
Efficiency: IE 4
Item: single/three phase motor
Mounted: B3/B5
Ratio: 7.5-100
Noise Level: Less Than 60db
Rated Speed: 1400rpm
Center Distance: 25~130mm
Output form: solid shaft / hollow shaft
Bearing: CZPT bearing
Rated Voltage: 220/380V
Quality control system: ISO9001:2015
Packaging Details: Carton packing,Wooden box packing,or according to customers’ requirements
Port: HangZhou/HangZhou/ZheJiang /Hong kong


Factory single phase flange mounted motor, single phase 2hp electric motor
Product description

We are the factory in Xihu (West Lake) Dis.Guan professionally produce transmission parts for machines simple listed here for your reference :
1. magnetic powder clutch and brake series
2. tension controller series : manual tension controller,automatic tension controller.
3. air shaft and air adaptor series
4.safety chuck series
5. Edge positioning system series
6. air brake and clutch series
7. electromagnetic clutch and brake series
8. worm reducer and motor series

PRODUCT DETAILSAfter applying symmetrical voltage to the stator winding of induction motor, a rotating air gap magnetic field is generated.Since the rotor winding is short-circuited, a rotor current will be generated.The interaction between the rotor current and the air-gap magnetic field produces an electromagnetic torque that drives the rotor to rotate.The speed of the motor must be lower than the synchronous speed of the magnetic field, because only in this way can the conductor of the rotor be induced to generate the potential of the rotor current and electromagnetic torque.So the motor is called an induction machine, also known as an induction motor.

Characteristics of asynchronous motor:
1. Small and lightweight.
2. It is easy to realize high-speed rotation with the rotation speed exceeding 10000r /min.
3. High operating efficiency at high speed and low torque.
4. High torque at low speed, and a wide range of speed control.
5, high reliability (strong).
6. Low manufacturing cost.
7. Simplification of control device.

♦NMRV/NRY Series Worm and Gear Motor
Single AC motor.The square aluminum gearbox is manufactured based on GB157188 cylindrical gear parameter.During the process, many advanced technologies are adopted.So it has compact structure, good appearance and excellent heatsink when running.

This series motor has the following characteristics:smooth running, low noise, large transmission ratio and strange loadcapacity and it may match with different kinds of motors for realizing speed adjustment.
♦Working principle:
High quality gear motor is used to transfer rotation and torque from motor to working machine,the function is to decrease speed by gears and increase torque.

♦Design characteristics
1:Use low-carbon Aluminium Alloy cementation processing completely.
2:High precision on gear and gear shaft.
3:Small volume with big torque.
♦Maintenance:
1:After 300-hours operation, please change the oil, and flush the gear uint with suitable detergents.
2: Please do not mix the mineral oil and synthetic oil.
3.No more than 4000m above sea level.
4.Ambient temperature:-25~40degree.53.Relative humidity ≤95%(at +25degree).
5.The followed temperature rise: no more than 75K(when 1000m above sea level)degree.

NMRV gear motor specification:
Type:Electric motorModel:Center Distance:25,30,40,50,63,75,90,110,130Ratio:5,7.5,10,15,20,25,30,40,50,60,80,100Color:Blue/Silver WhiteMaterial:100% copper wireAluminium AlloyWorm Gear- Cooper-10-3Worm-20CrMnTi with carburizing and quenching, surface hardness is 56-62HRCShaft-chromium steel-45Packing:Carton box/per set(With foam board inside)Bearing:Brand “NSK” BearingSeal:NAK Seal from ZheJiang Warranty:1 yearInput Power:0.1kw,0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,4kw,5.5kw,7.5kwUsages:In industrial machine: widely used in packing, printing,textile machine,as well as
woodworking,glass and plastics,food stuff,ceramics,chemical,etc.
IEC Flange:B5,B14Lubricant:Synthetic & MineralRelated ProductsMORE PRODUCTS

Product Uses
APPLICATION

Packaging & Shipping
PACKAGING AND SHIPPING

Company InformationABOUT US

AdvantagesWhy do you choose us?
Your choice,We promise!

Eight reasons to choose us:
1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-1 customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, 1 year warranty.
6. Supporting professional matched other equipments.
7. The company has more than 1 product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

Five Core strengths:
1. The first domestic independent R & D manufacturer and 13 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.
CertificationsCERTIFICATE

FAQ
FAQ
1.When can I get the quotation?
We usually quoted within 24 hours after receiving your inquiry. If you are very urgent to get the price, please call us or tell us in your email, so that we can regard your inquiry priority.

2.How should I place an order?
Please let us know the model number based on our specs for powder clutch, powder brake, air clutch, air brake, electromagnetic clutch, electromagnetic brake and safety chucks, other transmisson parts.
For air shafts,air adapter please show us your drawing, or let us know your request, and then we will provide you drawing for confirmation.

3.What’s your MOQ basis?
Normally, we don’t have MOQ request, except the customized mini clutches/brakes.

4.What about the lead time for production?
Honestly, it depends on the order quantity and the type of our products. For powder clutch, powder brake, tension controller,which is about 3-5 days. For safety chucks, air shafts which need about 15-30days.

5.What is the term of shipment?
We can arrange with EXW, FOB, CIF…etc. You can choose the most convenient 1 or cost-effective way.

More concerned for our products , please do not hesitate to inquiry now!

>>>CLICK HERE GO TO THE HOMEPAGE

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China wholesaler Factory single phase flange mounted motor, single phase 2hp electric motor  with Good qualityChina wholesaler Factory single phase flange mounted motor, single phase 2hp electric motor  with Good quality